Consolidated Toledo Drill - America's Finest High Speed Steel Cutting Tools
Our product is sold through select Distributors. Please contact Customer Service 1-800-328-4655 (personally answered) for the nearest distributor.


Car Reamers - Fast Spiral


PDF Download:

Download Specialty Tools Section
HSS Specialty Tools Section

Critical factor with acrylic is heat generated from the bit. If the bit is less than sharp then you will have to drill very slowly (either slow bit speed or retracting the bit often).

Sharp bits can be drilled quicker but you still have to retract the bit often to let the material cool down.

Overheating will result in a crystalline sugar-like melting around the hole. Also try not to punch the bit through the material when you are almost through the material.

 


QUICK LINK » Acrylic Chipfree Drill

ACRYLIC CHIPFREE™ DRILLS — Super Premium


Type 183-AG Acrylic Drills with Chipfree™ Point
    Type 183-AG Acrylic Drills with Chipfree™ Point
    • Super Chipfree™ point is precision ground at a 60° angle for gradual penetration to avoid cracking and chipping of the acrylic material.
    Special 0° rake angle on cutting edge eliminates "grabbing" when drill breaks through plastic, acrylic, or laminate surfaces.
    • All sizes over 1/4" have 1/4" shanks.
    Type 183-AG Acrylic Drills with Chipfree™ Point DOWNLOAD: Type 183-AG Acrylic Drills with Chipfree™ Point


Type 183-AG Chipfree™ Acrylic Drills Set