Consolidated Toledo Drill

Easily enlarges existing holes without damaging the point.
Unique tip geometry reduces heat generation & cutting tool wear increasing tool life.
3–flats on shank eliminates slippage.
Ideal for Hard steel, Sheet metal, Brass, and Acrylics.
Proudly Manufactured in the USA.

Type VT-13 Set

Part# 22863 — Drill sizes: 1/16" – 1/4" by 64ths
Corrosion resistant, epoxy baked on coating.
Rugged, Heavy gauge ALL steel case.
Each storage hole precisely sized for accurate quick tool selection.
Proudly Manufactured in the USA.

Type VT-15 Set

Part# 22873 — Drill sizes: 1/16" – 1/2" by 32nd
Each storage hole precisely sized for accurate quick tool selection.
Secure, snap–lock steel cover
Rugged, Heavy gauge ALL steel case.
Proudly Manufactured in the USA.

Type VT-21 Set

Part# 22883 — Drill sizes: 1/16" – 3/8" by 64ths
Each storage hole precisely sized for accurate quick tool selection.
Corrosion resistant, epoxy baked on coating.
Secure, snap–lock steel cover
Proudly Manufactured in the USA.

Type VT-29 Set

Part# 22893—Drill sizes: 1/16" – 1/2" by 64ths
Each storage hole precisely sized for accurate quick tool selection.
Secure, snap–lock steel cover.
Rugged, Heavy gauge ALL steel case.
Corrosion resistant, epoxy baked on coating.
Proudly Manufactured in the USA.

Type VT-29P Set

Part# 22903—Drill sizes: 1/16" – 1/2" by 64ths
Strong, Lightweight and Highly–impact resistant.
Reliable, High–density plastic.
Weatherproof, Watertight & Unbreakable.
Proudly Manufactured in the USA..

Type VT-29PO Set

Part# 22913—Drill sizes: 1/16" – 1/2" by 64ths
Strong, Lightweight and Highly–impact resistant.
Reliable, High–density plastic.
Weatherproof, Watertight & unbreakable.
Proudly Manufactured in the USA..