Consolidated Toledo Drill
PRODUCT CATALOG >> High Speed Steel Titanium Nitride Drills
Type 190-AN — TiN Coated Jobber Length
Titanium nitride coating adds lubricity and hardness, enhancing chip flow, finish hole quality and drill life.
135° Split Point is self-centering for reduce thrust and easier penetration.
Manufactured to NAS 907 B aerospace specification.
Heavy-duty construction for drilling in tougher materials.
Type 100-BN — TiN Coated Jobber Length
High speed steel 118° Point drill performs well in a wide variety of drilling applications.
Titanium nitride can extend tool life up to 5 times longer in general purpose drilling applications of materials; such as Steel, Stainless steel, Bronze, Brass an certain Gray iron casting.
Titanium nitride coating adds lubricity, hardness and enhancing chip flow.
Type 190-PT – TiN Coated Parabolic Flute
Exceptional high performance drill with the extremely hard Titanium nitride extends tool life 500% or more in abrasive drilling applications.
Parabolic flute drills — are designed to allow deep hole drilling without frequent drill removal to clear chips.
135° split point for fast penetration and accurate starting without center punch.
Type 135-TN — Tin Coated Screw Machine
Titanium nitride provides a extremely hard surface with high lubricity.
Accurate centering, fast penetration. Ideal for thin metal work.
NOTE: Titanium nitride coated package quantity: (6 qty. — 1/16 thru 9/32", A-L, #1-60) (3 qty. — 19/64 - 1/2")
Type 260-BN — TiN Coated Screw Machine
118° point performs well in a wide variety of drilling applications.
This drill is designed for ease of penetration and to facilitate chip removal in tough, hard materials.
May also be used in portable drilling equipment. Drill sizes over 1–1/16" have a Reduced shank.
Type 150-N — TiN Coated M42 Cobalt Jobber
Cobalt drills require rigidly held positive feed drilling equipment.
Titanium nitride coating for lubricity, and extended tool life.
Manufactured from M42 high speed steel containing 8% cobalt which increases high red hardness.
Type 260-DN — TiN M42 Cobalt Screw Machine
Manufactured from M42 high speed steel contains 8% cobalt increasing hot hardness.
135° Split point for fast penetration and accurate starting without center punch.
Titanium nitride for lubricity, abrasion resistance extended tool life.
High hot hardness of cobalt permits speeds 30% over regular high-speed steel drills.
Type 221-PT — TiN Parabolic Flute Taper Length
High performance drill combines the superior wear resistance of titanium nitride, and the deep hole drilling advantages of parabolic flutes.
Exceptional qualities of these drills can provide high productivity and extended tool life when compared to uncoated high-speed steel.
Performs best in low to medium tensile strength material.
Main characteristic is a wide open flute shape with a narrow land.